M8 Self - Tapping Thread Insert With 303 Stainless Steel Material
Advantages
1. Sets of self tapping screw self tapping, base material without
prior tapping, save costs.
2. And finished product contact surface is large, bear a strong
pull, product design can use the lower strength of the material.
3. For wear or break has teeth with female thread repair, self-tapping threaded sleeve can continue to use the same screw.
4. Strong resistance to vibration, can prevent loosening.
5. With no residual gap of the base metal, the mother material also
has good air tightness when the bubble is contained.
6. Self tapping threaded sleeve installation is simple, rapid, only
an assembly tool, low cost, almost no adverse rate.
Parameter
Product Name | M8 Self - Tapping Thread Insert With 303 Stainless Steel Material |
Material | stainless steel, steel, brass, aluminum |
Size | M8*1.25*15 |
Finish | Blue zinc plated, black zinc plated, nickel plated, brass plated,
etc |
Grade | SUS304, SUS316 |
Standard | MS21209,DIN8140 |
Thread | coarse, fine |
Usd | Electronic, machine, furniture, solar energy, car,mobile phone, etc |
Manual installation
Use the special screw sleeve installation tool. Refer to the figure
below for the specific operation method. The end of the tool in the
figure is a quadrangle head, which can be connected with a manual
tapping wrench.
Electric installation
The DiI type of HRT numerical control suspension screw sleeve
electric installation machine designed by AVIC can complete the
installation of screw sleeve with high efficiency and high quality.
Installation precautions
- It is necessary to select the appropriate drilling size according
to different matrix materials
- If the hole is large, it is easy to take out the screw sleeve when
the mounting rod exits
- If the hole is small, the installation of the screw sleeve will be
difficult or even hindered
- At the beginning of installation, it is necessary to ensure the
perpendicularity between the screw sleeve and the base surface of
the installation hole, otherwise it is easy to deviate and cause
unsuccessful installation.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge if we have them
in stock, but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 50%
T/T in advance ,balance before shippment.
