High Tensile Strength M3 Stainless Steel Screw Lock Thread Inserts
For Thread Repair
Information
Wire thread insert made of high strength, high-precision, smooth
surface of the cold-rolled stainless steel rod working diamond
formed by the helical coil, a threaded hole embedded low-strength
aluminum, magnesium alloy, iron, steel, glass, plastic and other
materials of construction of the wire thread insert, The thread can
be protected to prevent the screw hole from being damaged by
vibration, impact, abrasion, rust and other problems, and greatly
extend the service life of the substrate.
The difference between the locking wire thread insert and the
ordinary wire thread insert is that a pentagonal or hexagonal ring
(locking ring) of 1 to 2 turns is specially made in the middle of
it.
When the bolt is screwed into the threaded hole formed by the
locking wire thread insert, the bolt will receive resistance at the
position of the locking ring. If the bolt continues to be screwed
in forcefully, the polygonal side of the locking ring will bend
elastically, and the elastic type will become close to Round, but
there is always a tendency for the locking side to return to a
straight side, so that the side of the locking ring clamps the bolt
tightly to achieve the purpose of locking the bolt. When subjected
to vibration and impact, the screws can be prevented from loosening
and falling off, and the bolts can be disassembled repeatedly,
which has better process performance than usual locking devices.
When the locking performance of the internal thread formed by the
locking type wire thread insert decreases for a long time, the
original thread insert can be removed, and a locking type wire
thread insert is reinstalled, and the internal thread has a new
look.
Principle
The locking wire thread insert is a new variety developed on the
original basis of the ordinary wire thread insert. There are 1 to 2
turns of pentagonal or hexagonal shape in the middle of the locking
type wire screw sleeve. When the bolt is screwed halfway into the
threaded hole, the head of the bolt hits the locking ring. Some
other conventional locking devices have superior locking
performance and higher strength, and can be disassembled
repeatedly.
When the screw is screwed into the screw hole of the locking wire
thread insert, it is loose before entering the polygonal locking
ring. When the screw enters the polygonal locking ring, the polygon
needs to be opened to deform the locking edge. At this time, when
the screw is screwed in, the frictional force given to the screw by
the locking edge must be overcome. After the screw is tightened,
this friction force can prevent the screw from loosening by itself,
thus replacing other locking methods.
Feature
1. The stainless steel thread has high strength.
2. The hardness of the screw surface can reach HRC43~50.
3. The surface accuracy can reach 2~4 μm.
4. Reduce the friction between the threaded surfaces. To
5. Increase the bearing capacity of the screws. To
6. Reduce the torque that the screw bears.
7. Make the load distribution on the entire rotating surface even.
8. Increase the load-carrying capacity of fasteners.
Parameter
| Options |
| Material | 304H | 321 | 316 | Inconel X750 |
| Standard | DIN-8140 | MS-21209 |
| Model | Metric | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| British | 6-32 | 8-32 | 10-32 | 1/4-20 | 1/2-13 | 5/8-11 |
| Length | 1d | 1.5d | 2d |
| Accuracy | Green | Red | Golden | Blue | Non | Customized |
Advantage
1. The stainless steel thread has high strength.
2. The hardness of the screw surface can reach HRC43~50.
3. The surface accuracy can reach 2~4 μm.
4. Reduce the friction between the threaded surfaces. To
5. Increase the bearing capacity of the screws. To
6. Reduce the torque that the screw bears.
7. Make the load distribution on the entire rotating surface even.
8. Increase the load-carrying capacity of fasteners.
Why Choose Us?
1. A factory with more than 20 years' experience in manufacturing
of Thread Inserts.
2. Competitive pricing & military quality.
3. Quick replies to quotations and requests for information.
4. Timely deliveries, rich experience in IMP and EXP.
5. Advanced R & D center, more than one thousand types of threaded
inserts and tools.
6. Strict quality control system, passed the SGS and ISO9001: 2015.
7. Quality tools & products, as good as heli-coil, Keensert, Ensat
and etc.
8. Comprehensive after-sales support and troubleshooting.
9. Famous brands in China .
10. High quality enterprises in the region.
